Shanghai Metal Stamping, know this knowledge, your design is more reasonable

In the process of product design of Shanghai Metal Stamping, sometimes the selected metal materials may not reach the expected performance in actual production. Therefore, it is very important to master the characteristics of metal materials before designing. Xiaoshuo sorted out a few points and shared with you: Shanghai hardware stamping and bending processes should not use high-elastic materials. The greater the elasticity of the material, the greater the rebound of the formed part to its original state after bending, which will cause the workpiece to fail to reach the predetermined shape, requiring multiple mold trials and mold repairs. The material used in the bending process should have sufficient plasticity, a lower yield point and a higher modulus of elasticity. The former guarantees no cracking, and the latter makes it easy for the workpiece to reach an accurate shape. Materials suitable for bending are low carbon steel, pure copper and pure aluminum. Hardware, 15 years of ingenuity focused on Shanghai hardware stamping, 20,000+ sets of customized mold production experience, daily production capacity of 3 million punches, stamping accuracy up to ±0.01mm, and 16 quality inspections to strictly control quality. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!